Close filters
 
  •  
  •  
from to
1 From 3
No results were found for the filter!
Ultimate 64 Keyboard Mount Set for C64C Case
Ultimate 64 Keyboard Mount Set for C64C Case

3D-printed C64C keyboard mounts set for the new C64C cases and the Ultimate 64 / Ultimate 64 Elite  motherboard. These holders are needed if you want to install an Ultimate 64 motherboard into a new C64C case. The mounts are made of PLA and printed by FDM. This set consists of a left keyboard mount, an adapter for the right keyboard mount, the right keyboard mount, a support element for the motherboard and for the SID chips, a power cover plus matching on/off button. This set is available in different colors.

€23.80 *
C64C Keyboard Mounts (universal)
C64C Keyboard Mounts (universal)

3D printed C64C keyboard holder for the new C64C cases. These holders are needed, for example, if you want to install a C64 reloaded MK1/MK2 in a new C64C case. The holders are made of PLA and printed using the FDM process. This set consists of a left and a right holder. The holders are available in silver, black and white.

€15.41 *
LED Strip for Ultimate 64 (Elite)
LED Strip for Ultimate 64 (Elite)

LED strip with 24 LEDs for Ultimate 64 and Ultimate 64 Elite. The LED strip has a length of 40 cm and the cable is also 40 cm long. The LED strip is available in white or black. The connector is either a 4-pin male connector (starting with version 1.4) or for the older mainboards (up to version 1.3) a 26-pin female connector.

ATTENTION: It is essential to observe the correct polarity. See photos.

€11.95 *
Ultimate 64 Power Cover + Power Button
Ultimate 64 Power Cover + Power Button

NEW! Upgraded version for Ultimate 64 and Ultimate 64 Elite.

Cover and Power Button for the power supply connector of an Ultimate 64 motherboard. This 3D printed cover for the power supply connection is used to beautify your C64C case in combination with an Ultimate 64. The cover is printed from PLA using the FDM process.

Installation
The installation is done by loosening the existing mainboard screw, inserting the cover and turning the screw back into place. To install the power button you have to first pull off the smaller existing one. After that simply push it on the power button pin.

Hint
As this is a 3D printed spare part, minor irregularities in the product can be expected.

€4.95 *
C64C Case – Transparent
C64C Case – Transparent

In short available at www.icomp.de

New Commodore C64C replacement case for your "outdated" C64C. Is your C64 yellowed, torn, has nasty holes or do you just want to give it a new color? Then this case in transparent is just the thing for you. Continue the Commodore story with this licensed package.

 

Production

The housings were made with original Commodore molds. The molds have been reworked several times to facilitate production. Due to the modern plastic, the choice of color and the old molds, especially in the dark housings, binding seams and sprues are visible for production reasons (see photos). The desired variety of colors was more important to us and ultimately outweighed the perfection of the visual appearance. We are pleased that it was possible to "reanimate" the more than 30 years old molds.

 

€64.00 *
C64C Label "ultimate 64" Original Beige style sticker
C64C Label "ultimate 64" Original Beige style...

Replacement sticker for the C64C case for the "ultimate 64" Original Beige style. Printed with UV-stabilized inks on high-quality film material and UV-stabilized protective laminate from 3M.

€3.57 *
C64C Label "ultimate 64" SX-64 style
C64C Label "ultimate 64" SX-64 style

Replacement sticker for the C64C case "ultimate 64" SX-64 style. Printed with UV-stabilized inks on high-quality film material and UV-stabilized protective laminate from 3M.

€3.57 *
C64C Label "ultimate 64" Breadbin style sticker
C64C Label "ultimate 64" Breadbin style sticker

Replacement sticker for the C64C case for the "ultimate 64" Breadbin style. Printed with UV-stabilized inks on high-quality film material and UV-stabilized protective laminate from 3M.

€3.57 *
C64C Label "ultimate 64" RetroBlack style sticker
C64C Label "ultimate 64" RetroBlack style sticker

Replacement sticker for the C64C case for the "ultimate 64" RetroBlack style. Printed with UV-stabilized inks on high-quality film material and UV-stabilized protective laminate from 3M.

€3.57 *
Bi-Color LED 5×2×7 mm with cable for C64C case
Bi-Color LED 5×2×7 mm with cable for C64C case

Duo-color LED 5 x 2 x 7 mm ready assembled with cable and plug for C64C case. We offer the Duo-color LEDs in the colors red/green and red/blue. The size is adapted to ~4.6 x 2 x 7 mm suitable for the new cases. No further processing necessary. The length of the cable is approx. 50 cm. 

€4.95 *
Bi-Color LED 5 mm with cable
Bi-Color LED 5 mm with cable

Duo-color LED 5 mm ready assembled with cable and plug for C64 cases (breadbin). We offer the Duo-color LEDs in the colors red/green and red/blue. The length of the cable is approx. 50 cm. 

€4.95 *
Ultimate 64 Keyboard Mount Adapter (right)
Ultimate 64 Keyboard Mount Adapter (right)

3D-printed C64C keyboard mounts adapter for the new C64C cases and the Ultimate 64 motherboard. This adapter is needed if you want to install an Ultimate 64 motherboard in a new C64C case and you already own the holders available in this shop. With this adapter, you can mount the right holder (plastic or metal) a little to the left and use it for the Ultimate 64. The holders are made of PLA and printed using the FDM process. The holders are available in the colors: silver, black, beige and brown.

€5.95 *
1 From 3
Viewed